Custom Screen Printed Clothing
Are You getting the most for your Tshirt Printing Dollar?
Tshirt Printing Tips: Taping Off The Screen For Printing
Tape off any areas on the sides of the emulsion toward the frame edge where there may be no emulsion present. Typically a scoop coater for a 20 X 24 screen is about 14 inches wide. This will leave about 2 inches or less of open mesh on the length sides near the frame edge. Make sure to tape off all 4 sides to ensure that stray ink will not pass through unwanted areas of open mesh. Some screen printers prefer to do this with block out. I find using masking tape or screen tape is best and costs less. You can tape off the edges of a screen on either side. It is your preference. I tape off my screens on the substrate side because I work in such a way with my ink that tape on the ink well side gets in my way. This is because I prefer to use the more controlled, efficient, and ergonomic pull flood and push stroke.
The business world today has changed in more ways than just one. This has led to many business having to think outside the box if you are to stay relevant in the society. With this came the need to customize your apparels with business logos, motto or even objectives. To help us in understanding this practice, we shall look at its significance in the business world today.
Nothing sells out the company's brand better than customized business apparels and this is the first reason that necessitates customization of business apparels. It is like a mirror that reflects you as a business to the world. A good and friendly image means more customers and vice versa. The best way achieve this is having beautifully crafted apparels which posses the name of your business. By wearing the apparels, the employees are automatically appointed ambassadors of the company wherever they go.
Tshirt Printing Tips: Coating The Screen With Emulsion
Depending on how good your air circulation is and how many screens you coat at one time, your drying time can be anywhere from an hour for one screen to overnight for a rack full. The drying time will also depend on the relative humidity in your geographic region. Remember that the area where the screens are drying with emulsion should be a clean room with minimal dust being airborne. Dust that falls onto the surface of the wet emulsion on the screen is most likely to cause pinholes or blockage within your stencil area.
Once the screen is dry it is very light sensitive and all steps hereafter up until the screen is taken out of the exposure unit should be done in subdued yellow or red light.
Credibility of the company becomes more real in the face of potential customers when they encounter company employees donned in well designed company attires. That small logo at the front of stunning polo shirt says a lot about the company even before you utter a single word. They speak volumes that would take a lot of time in explaining. it therefore serves as a way of promoting your organization. It is a form of advertising that is referred to as a walking billboard in the business world.
Where To Start with Custom Apparel Services and More
It is a perfect conversation starter if you happen to be standing close to a total stranger. They will most likely query you on the nature of the business and how it compares to its competitors. This gives you the chance to be able to explain to them the nature of your business and how to acquire your goods or services. You will also acquire valuable information from those who are already customers of the business about what they think about the business performance in terms of customer care.
Tshirt Printing Tips: Placing Artwork on The Screen For Exposure
This should be done in subdued yellow or red light. For a one color design placing the film positive on the screen for exposure is quite simple. We will place it on the substrate side with the film facing up so that when you look at it from the ink well side the design will "read right". Just center the design from left to right and set it down about 3 or 4 inches from the top. The top would be the side that is closest to you when mounted in the press. Use clear Scotch Tape to hold the film in place on the emulsion coated screen. It is often helpful to make a "dog ear" on the tape for easy removal after being exposed and before washing out.
Overwhelmed by the Complexity of Shirts? This Screen Printing Guide May Help
In the case of a supermarket or retail store, the apparels will get to serve as uniforms for the employees. This makes it easy for the customers to differentiate the employees from their fellow buyers. Good service delivery is therefore optimized.
Lastly, the custom branded apparels will serve to reinforce comradeship and a sense of pride among the employees. Whether it is the manager or just a mere store man, they get to have a good working relation at the workplace and even outside. Relation among them is boosted which results in ample working conditions since the employees are free with one another and help each other out whether at the workplace at home. These results in a great working environment.